Stahlfabrik Doppelträgerbrücke Elektromagnetischer Kran

Beam:

QC model Double Girder Bridge Electromagnetic Crane, the main beam and end beam boxed type with ISO standard.Steel plate material Q235B/Q345B
CNC cutting for complete steel plate, with high surface flatness and        accuracy.
National standard 24#38#43#adapted for cross travel rail.
High quality automatic welding and NDT inspection for main welding lines.
Impeller blasting Sa2.5 for complete girder after welding to eliminate welding stress.
Epoxy zinc-rich painting, 2*2 with 140μm. Nice appearance and good gloss.
Main girder and end carriage connected by welding as a whole structure, making the crane longer serving life and more durable.
Reformative flat wheels and anti-friction bearing helping the long travel more smooth with littlenoise.
Checkered plate, handrail (1050mm) and upright united together as maintenance platform
Buffers derailment protectors equipped for safety crane travel.

Spreader:

Normally, the Double Girder Bridge Electromagnetic Crane is going with the carrier beam, which is of fixed type, telescopic type, or rotating type, according to the different working request.

Electromagnet:
a)  Principal. Based on the details of the lifting subject, we recommend the most suitable electromagnet for customers.
b)  Magnetic regulating and Preserving Equipment. It’s a safety insurance system of rectification control system and power-off protection system. Normally, we could control the protection time after power off 15 min at least.

Electrical equipment: Electric systems are Siemens brand Schneider brand or CHINT brand---Best in China.

Motors: Motors are Nanjing Special Brand –NO.1 for electric hoist lifting and single beam travelling.

Gearbox: Tailong or Taixing brand, Top brand on heavy duty gearbox
Operation modes: Ground handle, wireless remote control.

Safety is the most important issue for crane. To ensure the safety, the following safety devices are equipped in SGY crane.
1. Weight overload protection device. 
2. Top quality long time bearing polyurethane materials buffer.
3. Crane travelling limit switch.
4. Voltage lower protection function.
5. Emergency stop system.
6. Current overload protection system and so on!

Order to notice:

1. Entrance into drivers cabin including top, rear and end types.
2. When using of electro-magnet, revolving part screw of hooks must be tightened, not allowed to   rotate.
3. Capacity including electro-magnet dead weight.
4. Crane whole weight excludes electro-magnet and its accessories weight.
5. The indicated electro-magnet listed in the table is for your reference, absorption w eight of this model electro-magnet is the max  absorption capability, customer could select according to actual use conditions.